Logo Impulse Project Engineering BV Photo with water pumps, Impulse Project Engineering BV Slogan: Impossible to live without water
Home Impulse Project Engineering Products Technical information Our dealers Company Contact information
Photo with water pumps, Impulse Project Engineering BV
Closed during the Christmas period

Development of ultrasonic water meter

Favourable charge-off with regard to our pumps


Products for groundwater management
Impulse Pumps
     Yamuna
     Mumbai
     Oriëntal
     Abu Dhabi
     Free shaft end of pump

Auger rigs
     Beretta T44-H
     Beretta T52-H
     Beretta T152-H

Accessories
     DigiFlow Flowmeters
     Quick connection type Cardan
     Quick connection type Bauer
     Drill rods
     Quick connection type Millar
     Starting points
     Impellers
     Hoses

    
PRODUCTS / Impulse Pumps / Yamuna


Yamuna


Technical specifications Impulse series

Specifications :
 
L x W x H : 225 x 95 x 140 cm.
Weight : 2134 kg
Tank capacity : 205 litres (10 to 14 days continuous operation)
Motor : Hatz 1D81 Z, electric starter and equipped with oil pressure protective device and hour meter
Standard accessories : 
  • Heftruck kokers onder omkasting
  • Centraal geplaatst hijsoog
  • Aansluit koppeling zuig en perszijde (systeem Cardan of Bauwer naar keuze)
  • Olie aftap pomp voor dieselmotor olie en tandwielkast olie pomp
  • Gegalvaniseerde beschermbalken aan de lange zijde omkasting
 
For technical specifications concerning the pump, see “Technical specifications Impulse series”.
The Yamuna casing is a further development of the Himalaya casing. Its most important detail is better accessibility of the “head” of the engine. This casing also has a collapsible centrally located lifting hook that can be closed by means of a hatch (anti-theft feature). The door height is increased, which facilitates quick accessibility, particularly of the valves in the pump house.
Casing composed entirely of galvanized plate material and erected on an entirely sunken base with fuel tank beneath it. Subframe placed on vibration dampers in the base upon which the pump is erected. Engine placed on motor foundation flange and fastened to gearbox of pump. V-belt system with push and pull function. Exhaust and hot air discharge damper fastened to upper panel casing.
Engine equipped with electrical starter unit and safety hand crank so that in case of calamity the engine can also be started manually. Engine configuration equipped with separate fuel filter with water separator, hour meter, mechanical oil pressure protective device, extra large oilpan (for continuous operation) and hot air discharge tunnel. When the engine stops, warning signal in the form of a buzzer to remind the operator to unplug the device.
Casing has 5 hinged doors, 4 of these equipped with spagnolet closure. Door on flywheel side of pump can be closed using two M 10 bolts (as per safety regulations) Door panels equipped with noise muffling insulation finished with perforated protective plate.
Entire casing coated both internally and externally with a zinc primer and coated internally in grey RAL 7010. External coating in single RAL industrial colour of choice.
Noise level casing when in operation 46 dB at 10 meters.


Choose language Home | Products | Technical Information | Dealers | News | Company | Contact | General terms and conditions
Copyright 2007 © Impulse Holding BV | Webdesign & realisatie: Media Solutions